Información Básica.
No. de Modelo.
100 RV
Influente Tipo de Impulsor
Bomba de Succión Única
Posición del Eje de la bomba
Bomba Vertical
Revestimiento de la bomba combinada
Bomba de superficie Verticaljoint
Altura de montaje
Centrífuga de succión
Impulsor
Abierta
Uso
Bomba, Bombas, Bomba de condensado, Slurry Pump, Bomba de circulación, Coal Mining
fuente de alimentación
eléctrico
color
requisitos de los clientes
potencia
según el cliente
disposición de la junta
junta mecánica
material
caucho, poliuretano, acero inoxidable, etc.
asistencia personalizada
oem
motor
máx. 75kw
concentración
0%-70%
Paquete de Transporte
Wooden Box
Marca Comercial
Tobee
Origen
China
Código del HS
8413709990
Capacidad de Producción
2000PCS/Mon
Descripción de Producto
Product Overview
Products Description
Pump Desigh Features
Tobee®SPR Rubber Lined Vertical Slurry Pump
Design Features:
• Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
• Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
• Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
• Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable.
• Upper Strainer - Drop-in metal mesh; snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
• Lower Strainer - Bolted metal or polyurethane for SP; moulded snap-on elastomer for SPR.
• Discharge Pipe - Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected. 
Pump Structure
Tobee®SPR Rubber Lined Vertical Slurry Pump
Applications The SPR and SP designs, manufactured in popular metric sizes, provide a simple, yet rugged range of sump pumps specially developed for: Abrasive and/or corrosive slurries, Large particle size, High slurry densities, Continuous or "snore" operations,Heavy duties demanding cantilevered shafts in minerals processing, coal preparation, chemical processing, effluent handling, sand and gravel, and almost every other tank, pit or hole-in-the-ground slurry handling situation.
Tobee® SPR Rubber Lined Vertical Slurry Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters. Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe. The wet parts of SPR vertical sump pump is interchangeable with the SP series hard metal lined heavy duty sump pumps.
Products Description
Tobee®SPR Rubber Lined Vertical Slurry Pump
SPECIFICATIONS:
| Size | 40~300mm |
| Capacity | 7.28-1300m3/h |
| Head | 3-45m |
| Concentration | 0%-70% |
| Material | Rubber, Polyurethane, Stainless steel etc |
Pump Desigh Features
Tobee®SPR Rubber Lined Vertical Slurry Pump
Design Features:
• Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
• Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
• Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
• Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable.
• Upper Strainer - Drop-in metal mesh; snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
• Lower Strainer - Bolted metal or polyurethane for SP; moulded snap-on elastomer for SPR.
• Discharge Pipe - Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.
Pump Structure
Tobee®SPR Rubber Lined Vertical Slurry Pump
Applications
Tobee® SPR Rubber Lined Vertical Slurry Pumps Applications:
Tobee Pump Company Advantages
That is a professional manufacturer in designing and manufacturing Centrifugal Slurry Pumps, Pipes & Fittings, Valves etc. Our factory is located in the High tech Development Zone, Shijiazhuang City, China. We specialized in Horizontal slurry pumps, Vertical slurry pumps, Gravel sand pumps, Dredging pumps, Paper pulp pumps, Molten Salt Pumps, End suction pumps, Double suction pumps, Multistage pumps, Boiler feed water pumps, Self priming pumps, Inline centrifugal pumps, Sea water pumps, Chemical pumps, Irrigation pumps, Fire pumps, API 610 centrifugal oil pumps, Submersible sewage pumps, Slurry Pump spare parts, Pipes & fittings and Valves in domestic and over 80 countries in the world.
